Time Out – We Need To Grind

The Farmer’s Markets we do in the winter are doing very well.  More and more folks want fresh natural food.  So, we are running out of products and need to grind more.  However, raising the floors has made the stones and everything connected to them out of level.  In the photo you can see how it is done.  “A” is where we removed the wedges at the top of the posts.  “B” is where we drove in new wedges to raise the posts.  “C” is the axle the stones set on and had to be readjusted to perfectly vertical once the  posts were raised.  “D”  is the axle the pulleys ride on and has to be level so the flat belts will track in the center.  Once this is done the bed stone had to be leveled.  There are 4 large bolts under it to turn and level the stone.  I get it as close as possible with level and then lower the runner stone to within about  1/4 inch of the bed stone.  Start the runner stone spinning and slowly lower it until it starts touching somewhere around the stone.  Look for the sparks.  Then I turn the large bolt under sparks to lower the stone a hair and stop the sparking.  I raise the other side until it sparks and then down a hair.  A few more minute adjustments and it is pert near perfect.  Then check all 4 bolts to make sure they are holding the stone equally. Then, clean, clean and clean some more and we are ready for grinding.

208 Comments

  1. Don Taylor on August 29, 2020 at 2:22 pm

    Pretty neat! Hmm, interesting but I would want to know more.
    https://princegeorgetowing.com/



  2. Jake Brando on August 31, 2020 at 8:28 am

    I love how the wooden structures being set-up, looks medieval and very functional tools!



  3. Nicholas Keeg on September 1, 2020 at 8:56 am

    The wooden equipments looks long-lasting, but I notice the lighting systems is kinda naked, why don’t you hire professionals from https://www.affordablelectricians.com.au/croydon.html, to do the job for installation? Just a suggestion, cheers!



  4. Julian Rappioli on September 7, 2020 at 9:35 am

    Very nostalgic scene, when I was a kid, my granfather use to ran a mill in Texas, the scenery is exactly like this one, the smell of wood chips from oak tree and firewood wakes me up everyday, now I ran a site https://www.progressivecorporate.com.au, which is very different environment from shops and mills, I miss those days.



  5. Find out more on September 9, 2020 at 1:37 pm

    I suggest you open more space to allow sunlight in, it kinda look dim inside.



  6. roofingrockfordil.com on September 9, 2020 at 2:11 pm

    When making antique restoration decisions, it’s important to identify the value of a … We get a lot of calls from other shops who receive fine antiques … Pieces built before the 1960s are generally built from solid wood materials



  7. Bernard Jopin on September 9, 2020 at 3:29 pm

    Yes your right, this is a very nostalgic scene for me and my https://www.floorpros.com.au/newcastle.html



  8. taschengeld ladys on September 13, 2020 at 9:30 am

    If you want sexy chat pleasure with hot local ladies visit taschengeld ladys and enjoy!



  9. therufflifemobile.com/ on September 24, 2020 at 8:50 am

    Wooden structures are sometimes really hard to deal with because most of the cases they bend and it will affect its stability. Luckily you did some adjustments, I believe it will become more stable.



  10. Mark Williams on September 25, 2020 at 9:58 am

    We all want this set-up, I know that.
    http://www.propertystylingqld.com.au/



  11. furniture repair long island on September 26, 2020 at 12:53 pm

    Maybe a little bit of adjustments of the wood will make it much more stable.



  12. chatroom 2000 on September 30, 2020 at 6:23 am

    chatroom 2000 is probably the best web platform for free sexy chat with hot ladies… try to visit and you will not regret it…



  13. sexkontakte linz on October 1, 2020 at 1:26 pm

    sexkontakte linz is my favorite place for chatting with amazing girls



  14. Carpenters on October 8, 2020 at 10:59 am

    This project will sure be beautiful if its done. So much more if you consider putting wallpaperperthwa.com.au on it.



  15. My Homepage on October 19, 2020 at 12:03 am

    … [Trackback]

    […] Read More: bridgetonmill.com/time-out-we-need-to-grind/ […]



  16. Best Business Consulting Services Montgomery Al on November 3, 2020 at 9:56 pm

    … [Trackback]

    […] Read More on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  17. m? th?y ?i trên n??c on November 3, 2020 at 11:42 pm

    … [Trackback]

    […] Read More Info here on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  18. m? th?y tàu thuy?n ?ánh con gì on November 3, 2020 at 11:52 pm

    … [Trackback]

    […] Information on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  19. DevOps Strategy on November 4, 2020 at 6:05 am

    … [Trackback]

    […] Here you can find 9449 more Information on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  20. ???????? on November 4, 2020 at 11:32 am

    … [Trackback]

    […] Read More Information here on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  21. sex dolls shop on November 4, 2020 at 3:24 pm

    … [Trackback]

    […] Read More Info here to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  22. Grand Power Stribog SP9A3 9mm on November 4, 2020 at 4:17 pm

    … [Trackback]

    […] Find More on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  23. Panzer Arms AR-12 PRO Shotgun AR Twelve PRO 12ga on November 4, 2020 at 4:41 pm

    … [Trackback]

    […] Find More Info here on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  24. ngu mo thay mau on November 4, 2020 at 11:37 pm

    … [Trackback]

    […] Find More here to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  25. m? th?y b?n nhau on November 5, 2020 at 12:30 am

    … [Trackback]

    […] Read More Info here to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  26. n?m m? th?y ng??i ch?t ?u?i s?ng l?i on November 5, 2020 at 12:59 am

    … [Trackback]

    […] Here you can find 76156 additional Info on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  27. XFINITY Store by Comcast on November 5, 2020 at 3:06 am

    … [Trackback]

    […] Read More Information here to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  28. Alex Webcams on November 5, 2020 at 8:53 am

    … [Trackback]

    […] Find More here on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  29. n?m m? th?y m? b? b?nh on November 5, 2020 at 11:45 pm

    … [Trackback]

    […] Info to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  30. n?m m? th?y chó ?? con on November 5, 2020 at 11:52 pm

    … [Trackback]

    […] Read More on on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  31. m? th?y g?t lúa on November 6, 2020 at 12:22 am

    … [Trackback]

    […] Info on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  32. http://144.91.94.11/saranapoker/ on November 6, 2020 at 3:10 pm

    … [Trackback]

    […] Find More Information here to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  33. m? th?y g?u ?en on November 6, 2020 at 11:49 pm

    … [Trackback]

    […] There you can find 20142 additional Info on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  34. m? th?y ng??i n?i ti?ng on November 7, 2020 at 12:36 am

    … [Trackback]

    […] Here you will find 8196 more Information on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  35. mo thay an bap on November 7, 2020 at 12:53 am

    … [Trackback]

    […] Info to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  36. n?m m? th?y chuy?n nhà on November 7, 2020 at 1:01 am

    … [Trackback]

    […] Find More Info here on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  37. m? v? ch?ng cãi nhau ?ánh con gì on November 7, 2020 at 11:44 pm

    … [Trackback]

    […] Information on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  38. chó b? ch?t là ?i?m gì on November 7, 2020 at 11:50 pm

    … [Trackback]

    […] Find More to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  39. chiêm bao th?y r?ng r?ng on November 8, 2020 at 12:53 am

    … [Trackback]

    […] Read More on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  40. what is rust experimental? on November 8, 2020 at 11:31 pm

    … [Trackback]

    […] Info to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  41. m? th?y bi?n s? xe on November 8, 2020 at 11:40 pm

    … [Trackback]

    […] Find More here to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  42. tor search on November 9, 2020 at 3:50 am

    … [Trackback]

    […] Read More here on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  43. ???????????? on November 9, 2020 at 6:28 am

    … [Trackback]

    […] Find More on to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  44. pasarqq on November 9, 2020 at 10:38 am

    … [Trackback]

    […] Here you can find 91247 additional Information to that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  45. tình yêu kim ng?u on November 9, 2020 at 11:29 pm

    … [Trackback]

    […] Here you can find 90249 more Info on that Topic: bridgetonmill.com/time-out-we-need-to-grind/ […]



  46. aosexkontakte on November 19, 2020 at 4:25 pm

    nrw ladies is the best place to have online sex chat with local girls.



  47. Smchat on November 19, 2020 at 9:20 pm

    Smchat is best place to have adult chat with local girls and ladies so check best sex chat website in australia



  48. Dryer Vent Cleaning on November 20, 2020 at 12:31 pm

    This is so cool! I didn’t know about this method.



  49. Best HVAC Company on November 20, 2020 at 12:52 pm

    I would like to go to your festival someday.



  50. Bowed Well Repair on November 20, 2020 at 12:57 pm

    This basement reminds me of The Conjuring house in the movie.



Leave a Comment